fix:更换数据

src/views/dashboard/demo/components/demo.json

@@ -1,5 +1,4 @@
 {
-  "title": "示例设备展示",
   "LeftUp": {
     "Header": "设备静态图",
     "path": "svg/illustration.svg",
@@ -7,26 +6,8 @@
   },
   "LeftMidUp": {
     "Header": "故障诊断",
-    "Content": [{
+    "Content": [{ "FaultDesc": "失速", "Point": "YFJ_A_GZ001" }, { "FaultDesc": "喘振", "Point": "YFJ_A_GZ002" }, { "FaultDesc": "动调故障", "Point": "YFJ_A_GZ003" }, { "FaultDesc": "风机动调机构漏油", "Point": "YFJ_A_GZ004" }, { "FaultDesc": "风机动调伺服连杆轴脱开", "Point": "YFJ_A_GZ005" }, { "FaultDesc": "电机前轴(驱动端)承润滑异常", "Point": "YFJ_A_GZ006" }, { "FaultDesc": "电机后轴(非驱动端)承润滑异常", "Point": "YFJ_A_GZ007" }, { "FaultDesc": "风机润滑油冷却系统异常", "Point": "YFJ_A_GZ008" }, { "FaultDesc": "电机前轴(驱动端)承瓦面磨损", "Point": "YFJ_A_GZ009" }, { "FaultDesc": "电机后轴(非驱动端)承瓦面磨损", "Point": "YFJ_A_GZ010" }, { "FaultDesc": "轴承箱轴承(润滑)冷却异常", "Point": "YFJ_A_GZ011" }, { "FaultDesc": "轴承箱前轴(驱动端)承损坏", "Point": "YFJ_A_GZ012" }, { "FaultDesc": "轴承箱中轴(推力轴承)承损坏", "Point": "YFJ_A_GZ013" }, { "FaultDesc": "轴承箱后轴(非驱动端)承损坏", "Point": "YFJ_A_GZ014" }, { "FaultDesc": "油站油箱内油温异常", "Point": "YFJ_A_GZ015" }, { "FaultDesc": "油站油泵1泵体损坏", "Point": "YFJ_A_GZ016" }, { "FaultDesc": "油站油泵2泵体损坏", "Point": "YFJ_A_GZ017" }, { "FaultDesc": "油站控制油外漏", "Point": "YFJ_A_GZ018" }, { "FaultDesc": "油站润滑油外漏", "Point": "YFJ_A_GZ019" }, { "FaultDesc": "电动机电源一相断线", "Point": "YFJ_A_GZ020" }, { "FaultDesc": "电动机定子绕组匝间短路", "Point": "YFJ_A_GZ021" }, { "FaultDesc": "油站油泵1电动机电源一相断线", "Point": "YFJ_A_GZ022" }, { "FaultDesc": "油站油泵1电动机定子绕组匝间短路", "Point": "YFJ_A_GZ023" }, { "FaultDesc": "油站油泵2电动机电源一相断线", "Point": "YFJ_A_GZ024" }, { "FaultDesc": "油站油泵2电动机定子绕组匝间短路", "Point": "YFJ_A_GZ025" }, { "FaultDesc": "风机电动机冷却装置故障", "Point": "YFJ_A_GZ026" }, { "FaultDesc": "风机电动机电流异常变大", "Point": "YFJ_A_GZ027" }, { "FaultDesc": "油站油泵1电动机风扇坏", "Point": "YFJ_A_GZ028" }, { "FaultDesc": "油站油泵2电动机风扇坏", "Point": "YFJ_A_GZ029" }, { "FaultDesc": "油站油泵1电动机机械卡死", "Point": "YFJ_A_GZ030" }, { "FaultDesc": "油站油泵2电动机机械卡死", "Point": "YFJ_A_GZ031" }, { "FaultDesc": "油站油泵1电动机过载", "Point": "YFJ_A_GZ032" }, { "FaultDesc": "油站油泵2电动机过载", "Point": "YFJ_A_GZ033" }, { "FaultDesc": "油泵1和其电机靠背轮脱落", "Point": "YFJ_A_GZ034" }, { "FaultDesc": "油泵2和其电机靠背轮脱落", "Point": "YFJ_A_GZ035" }, { "FaultDesc": "冷却/密封风机1叶轮磨损", "Point": "YFJ_A_GZ036" }, { "FaultDesc": "冷却/密封风机2叶轮磨损", "Point": "YFJ_A_GZ037" }, { "FaultDesc": "油站控制油过滤器堵", "Point": "YFJ_A_GZ038" }, { "FaultDesc": "油站润滑油过滤器堵", "Point": "YFJ_A_GZ039" }
-      "FaultDesc": "故障1故障1故障1故障1故障1",
+    ]
-      "Point": "Diagnosis1"
-    }, {
-      "FaultDesc": "故障2",
-      "Point": "Diagnosis2"
-    },
-    {
-      "FaultDesc": "故障2",
-      "Point": "Diagnosis2"
-    }, {
-      "FaultDesc": "故障2",
-      "Point": "Diagnosis2"
-    }, {
-      "FaultDesc": "故障2",
-      "Point": "Diagnosis2"
-    }, {
-      "FaultDesc": "故障2",
-      "Point": "Diagnosis2"
-    }]
   },
   "RightMidUp": {
     "Header": "报警记录",
@@ -43,8 +24,8 @@
   "RightUp": {
     "Header": "大模型-操作指导",
     "Content": [{
-      "FaultDesc": "故障1",
+      "FaultDesc": "引风机抢风",
-      "Guide": "如何处理故障1"
+      "Guide": "A、B引风机动调在自动位，将电流小的风机动调切手动，开大动调，引风机电流增加?A，另一台引风机电流自动减少至？A，直至A、B引风机电流稳定。同时检查并确认引出口至烟囱烟道上档板处“全开”位，引风机出口余热换热器无堵塞后，逐步增加负荷，将A、B引风机电流、动调调至正常范围，投入引风机自动。若预警仍存在或工况改变易发生抢风，将A、B引风机动调设置一定偏置运行，维持A、B引风机电流稳定运行，根据实际能力带负荷。利用机组停机机会，对引风机出口烟道进行全面检查，尽可能降低烟道阻力，改善流动特性。"
     }, {
       "FaultDesc": "故障2",
       "Guide": "如何处理故障2"
@@ -52,78 +33,56 @@
   },
   "LeftDown": {
     "Header": "生产流程",
-    "path": "svg/illustration.svg",
+    "path": "svg/illustration.svg"
-    "Content": "/api/v1/assets/production_flow.svg"
   },
   "RightDown": {
     "Header": "参数信息",
     "Columns": [{
       "title": "序号",
-      "dataIndex": "序号",
+      "dataIndex": "ID",
       "width": 40
     }, {
       "title": "描述",
-      "dataIndex": "描述",
+      "dataIndex": "Desc",
       "width": 200
     }, {
       "title": "点号",
-      "dataIndex": "点号",
+      "dataIndex": "ObservedPoint",
-      "width": 100
+      "width": 150
+    },
+    {
+      "title": "单位",
+      "dataIndex": "Unit",
+      "width": 40
     }, {
       "title": "测量值",
-      "dataIndex": "测量值",
+      "dataIndex": "originValue",
-      "width": 80
+      "width": 65
     }, {
       "title": "预测值",
-      "dataIndex": "预测值",
+      "dataIndex": "predictValue",
-      "width": 100
+      "width": 65
     }, {
       "title": "安全区域",
-      "dataIndex": "安全区域",
+      "dataIndex": "threshold",
-      "width": 140
+      "width": 100,
+      "slots": { "customRender": "threshold" }
+
     }],
     "Content": [{
-      "序号": 1,
+      "ID": 1,
-      "描述": "",
+      "Desc": "A引风机电机前轴承温度1",
-      "点号": "",
+      "ObservedPoint": "SYG1_10HNC10CT110",
-      "测量值": 0.0,
+      "PredictedPoint": "SYG1_10HNC10CT110_CG",
-      "预测值": 0.0,
+      "ResidualThreshold": 1.0,
-      "安全区域": ""
+      "Unit": "℃"
-    }, {
+    }, {
-      "序号": 2,
+      "ID": 2,
-      "描述": "",
+      "Desc": "A引风机电机前轴承温度2",
-      "点号": "",
+      "ObservedPoint": "SYG1_10HNC10CT111",
-      "测量值": 0.0,
+      "PredictedPoint": "SYG1_10HNC10CT111_CG",
-      "预测值": 0.0,
+      "ResidualThreshold": 2.0,
-      "安全区域": ""
+      "Unit": "℃"
-    }, {
-      "序号": 3,
-      "描述": "",
-      "点号": "",
-      "测量值": 0.0,
-      "预测值": 0.0,
-      "安全区域": ""
-    }, {
-      "序号": 4,
-      "描述": "",
-      "点号": "",
-      "测量值": 0.0,
-      "预测值": 0.0,
-      "安全区域": ""
-    }, {
-      "序号": 5,
-      "描述": "",
-      "点号": "",
-      "测量值": 0.0,
-      "预测值": 0.0,
-      "安全区域": ""
-    }, {
-      "序号": 6,
-      "描述": "",
-      "点号": "",
-      "测量值": 0.0,
-      "预测值": 0.0,
-      "安全区域": ""
     }]
   }
 }

src/views/dashboard/demo/components/demo_old.json

@@ -0,0 +1,138 @@
+{
+  "title": "示例设备展示",
+  "LeftUp": {
+    "Header": "设备静态图",
+    "path": "svg/illustration.svg",
+    "Content": ""
+  },
+  "LeftMidUp": {
+    "Header": "故障诊断",
+    "Content": [{
+      "FaultDesc": "故障1故障1故障1故障1故障1",
+      "Point": "Diagnosis1"
+    }, {
+      "FaultDesc": "故障2",
+      "Point": "Diagnosis2"
+    },
+    {
+      "FaultDesc": "故障2",
+      "Point": "Diagnosis2"
+    }, {
+      "FaultDesc": "故障2",
+      "Point": "Diagnosis2"
+    }, {
+      "FaultDesc": "故障2",
+      "Point": "Diagnosis2"
+    }, {
+      "FaultDesc": "故障2",
+      "Point": "Diagnosis2"
+    }, {
+      "FaultDesc": "故障2",
+      "Point": "Diagnosis2"
+    }, {
+      "FaultDesc": "故障2",
+      "Point": "Diagnosis2"
+    }, {
+      "FaultDesc": "故障2",
+      "Point": "Diagnosis2"
+    }]
+  },
+  "RightMidUp": {
+    "Header": "报警记录",
+    "Content": [{
+      "Text": "故障1",
+      "StartTime": "Diagnosis1",
+      "Duration": 12.3
+    }, {
+      "Text": "故障1",
+      "StartTime": "Diagnosis1",
+      "Duration": 12.3
+    }]
+  },
+  "RightUp": {
+    "Header": "大模型-操作指导",
+    "Content": [{
+      "FaultDesc": "故障1",
+      "Guide": "如何处理故障1"
+    }, {
+      "FaultDesc": "故障2",
+      "Guide": "如何处理故障2"
+    }]
+  },
+  "LeftDown": {
+    "Header": "生产流程",
+    "path": "svg/illustration.svg",
+    "Content": "/api/v1/assets/production_flow.svg"
+  },
+  "RightDown": {
+    "Header": "参数信息",
+    "Columns": [{
+      "title": "序号",
+      "dataIndex": "序号",
+      "width": 40
+    }, {
+      "title": "描述",
+      "dataIndex": "描述",
+      "width": 200
+    }, {
+      "title": "点号",
+      "dataIndex": "点号",
+      "width": 100
+    }, {
+      "title": "测量值",
+      "dataIndex": "测量值",
+      "width": 80
+    }, {
+      "title": "预测值",
+      "dataIndex": "预测值",
+      "width": 100
+    }, {
+      "title": "安全区域",
+      "dataIndex": "安全区域",
+      "width": 140
+    }],
+    "Content": [{
+      "序号": 1,
+      "描述": "",
+      "点号": "",
+      "测量值": 0.0,
+      "预测值": 0.0,
+      "安全区域": ""
+    }, {
+      "序号": 2,
+      "描述": "",
+      "点号": "",
+      "测量值": 0.0,
+      "预测值": 0.0,
+      "安全区域": ""
+    }, {
+      "序号": 3,
+      "描述": "",
+      "点号": "",
+      "测量值": 0.0,
+      "预测值": 0.0,
+      "安全区域": ""
+    }, {
+      "序号": 4,
+      "描述": "",
+      "点号": "",
+      "测量值": 0.0,
+      "预测值": 0.0,
+      "安全区域": ""
+    }, {
+      "序号": 5,
+      "描述": "",
+      "点号": "",
+      "测量值": 0.0,
+      "预测值": 0.0,
+      "安全区域": ""
+    }, {
+      "序号": 6,
+      "描述": "",
+      "点号": "",
+      "测量值": 0.0,
+      "预测值": 0.0,
+      "安全区域": ""
+    }]
+  }
+}